A few tips for getting the best result on the finished job. You will need a good paint scraper, also a good wire brush if possible use a drill with a wire wheel atached. Your goal is to get as much loose paint and rust off as possible the more you remove the better your rail will look at the end. Pay extra attention to the post as they tend to rust away at the base , clean and paint that area very good to save yourself costly repairs, Final tip before you repaint you should wipe the entire rail down to remove all the loose dirt, if possible use a little paint thinner to have a nice clean rail so the paint bonds proper.
Cleaning and repainting your iron rails
by
Delaware valley fence and iron
of Delaware Valley Fence and Iron
(
25-Aug-2016
)