Astec of Maryland
410-560-6920
214 E. Ridgely Rd
Lutherville, MD 21093
Lutherville, MD 21093
Fax: 4105606921
No photo available for this business
Business Information
Coatings, Roofs, Re-Ply, Green, Cool roof, Energy savings, Elastomeric, Commercial, Industrial, Membrane, environmentally helpful, reflective, saves energyASTEC Ceramic Finish #900 provides the Astec system with it's durability as well as all its UV, heat, and energy saving advantages. It is deliberately applied in multiple layers to assure a well-bonded seamless surface over ASTEC water tight base sealers. ASTEC #900 surfaces can be tinted in a myriad of coordinating colors that are water based, fade resistant, and easily maintained over the life of the 10 Year Limited Warranty. ASTEC Waterproof Sealer WPM #9 is a fluid applied membrane which encases all roof seams, fastners, joints, flashings, intrusions, and substrate repairs inside a tough, pliable, seamless surface. The renewed surface is now wind and water tight, and ready to be bonded with Astec ceramic finish layers for the ultimate in durable protection from UV sunlight, heat, and airborne corrosives. Astec Reinforcing Poly Cloth is a high tensile strength polyester fabric used over joints, seams, and repairs in failing roof substrates. Once embedded in ASTEC Re-Ply System roofing membranes, ASTEC Reinforcing Poly cloth helps stabilize the restored roof into a single, seamless surface that is virtually impervious to tears, splits or damage from the elements. ASTEC Surface Conditioner #4000 is a concentrated aqueous acrylic emulsion sealer formulated to "lock down" chalky or efflorescence residue remaining after pressure washing. ASTEC Surface Conditioner #4000 provides a secure monolithic surface for bonding subsequent ASTEC layers. ASTEC BBT Butyl-Back Tape is highly adhesive and bonds especially well with ASTEC Re-Ply finish layers. Once Embedded, ASTEC BBT Tape's high tensile strength contributes to the stability of all restored areas. ASTEC Rust Control is specially formulated to neutralize and halt further rust corrosion on all rusted surfaces. It prepares and sets the metal for embedding in subsequent ASTEC surface coatings. ASTEC EPDM Rinseable Primer is the breakthrough product that made renewal of EPDM rubber roofs truly possible. We are now able to completely clear away the chalky surface residue on EPDM roofs caused by ozone deterioration. The seams and surface are clean and primed for bonding, assuring permanent melding and sealing of all subsequent ASTEC Re-Ply layers. ASTEC Base Sealer # 2000 is used to saturate and waterproof all seam sealing fabrics and tapes at joints, vents, and rubber roof repairs. Once cured a second layer of ASTEC Base Sealer # 2000 is applied over the entire roof area to create the first monolithic bonding surface that is both waterproof and wind tight. Base Sealer #2000 is formulated to bond the original EPDM rubber to the ASTEC Re-Ply Finish Layers. ASTEC #2000 Finish works with ASTEC Re-Ply Base Sealer #2000. The first finish layer bonds with the base sealer and melds into the old EPDM roofing material forming a new, seamless, weather tight roofing surface. Once the second layer of Re-Ply #2000 Finish cures, the new roof takes on the sustainable ASTEC advantages that permit the ICC water tight renewable warranty to be updated every ten years. ASTEC 100IG Finish is a ceramic filled vinyl terpolymer elastomeric surface material formulated with denser ceramics to better withstand exposure to extremes of heat, airborne corrosives, or infrared and ultraviolet radiation. ASTEC 100 IG's superior reflectivity, emissivity, and dissipation are most effective in white or light pastels. There are 30 standard colors. Custom colors can be ordered. ASTEC #5000 HB Textured Finish is a ceramic-filled vinyl terpolymer elastomeric material formulated with a high build consistency to finish as a stucco-like surface with more area for heat emissivity and dissipation. It retains full elasticity to avoid stress cracking. ASTEC #5000 HB is base white and available in 12 colors, or custom tinted by special order. Use lighter pastels to enhance ASTEC's ceramic reflectivity advantages. ASTEC Base Sealer # 4 is used to saturate and waterproof all seam sealing fabrics and tapes at joints, vents, and asphalt roof repairs. Once cured, a second layer of ASTEC Base Sealer #4 is applied over the entire roof area to create the first monolithic bonding surface that is both waterproof and wind tight. Base Sealer #4 is formulated to bond the original asphalt substrate to the subsequent ASTEC Re-Ply Finish layers.
Commercial Roofs,Walls and industrial tanks
1
Insulating Coatings Corporation
All ASTEC systems qualify for Energy Star and Cool Roof programs.
Business Description
ASTEC Coating Systems uses various combinations of the products in specific layers, thickness, and concentrates depending on the type and condition of the surface to be renewed.
Customer Reviews (No reviews)
No reviews were found for Astec of Maryland.